Steel Anchors 4

Approx. Rs 178 / Piece Get Latest Price

The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems.
The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion.

Advantages:

• Simple hammerset installation
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

Top Features:

• Simple hammerset installation.
• The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use.
• The hand setting tool EA-ST facilitates fast installation.

Applications:

• Pipelines and ventilation ducts
• Sprinkler systems
• Steel constructions
• Consoles

Building Materials:

• Concrete C12/15, non-cracked
• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. Rs 100 / Piece Get Latest Price

Product Brochure
The internally threaded anchor with a rim for simple Hammerset installation.
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Advantages:

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• Fixing point at h_ef 25 mm prevents anchor of falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

Top Features:

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• Visual control due to embossing.
• ETA approval for non-cracked concrete and multiple fixings.

Applications:

• Pipelines and ventilation ducts
• Sprinkler systems
• Cable conduits and wires
• Gratings
• Steel constructions
• Machines
• Consoles
• Shuttering props

Building Materials:

Approved for:

• Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0135
• ETA-07/0142
• ETA-07/0142
• DoP No. 0003
• DoP No. 0044
• DoP No. 0069
• DoP No. 0756-CPD-0294
• DoP No. 0756-CPD-0332
• DoP Nr. 1343-CPR-M 510-3

Approx. Rs 26 / Piece Get Latest Price

The internally threaded anchor with a rim for simple Hammerset installation.
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.


Advantages:

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• Fixing point at h_ef 25 mm prevents anchor of falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

Top Features:

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• Visual control due to embossing.
• ETA approval for non-cracked concrete and multiple fixings.

Applications:

• Pipelines and ventilation ducts
• Sprinkler systems
• Cable conduits and wires
• Gratings
• Steel constructions
• Machines
• Consoles
• Shuttering props

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0135
• ETA-07/0142
• ETA-07/0142
• DoP No. 0003
• DoP No. 0005
• DoP No. 0044
• DoP No. 0069
• DoP No. 0756-CPD-0294
• DoP No. 0756-CPD-0332
• DoP Nr. 1343-CPR-M 510-3

Approx. Rs 25 / Piece Get Latest Price

The internally threaded anchor with a rim for simple Hammerset installation.
The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval.

Advantages:

• The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation.
• The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The EMS machine setting tool allows for effortless installation, particularly in the case of series installations.
• The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety.
• Fixing point at h_ef 25 mm prevents anchor of falling out of the drill hole before being expanded.
• The black fixing point prevents the anchor from falling out of the drill hole during overhead installation.

Top Features:

• Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve.
• Use of standard metric screws and threaded rods lowers complexity.
• Power-saving series installation with machine setting tool EA II S-SDS.
• Visual control due to embossing.
• ETA approval for non-cracked concrete and multiple fixings.

Applications

• Pipelines and ventilation ducts
• Sprinkler systems
• Cable conduits and wires
• Gratings
• Steel constructions
• Machines
• Consoles
• Shuttering props

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems
• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0135
• ETA-07/0142
• ETA-07/0142
• DoP No. 0003
• DoP No. 0005
• DoP No. 0044
• DoP No. 0069
• DoP No. 0756-CPD-0294
• DoP No. 0756-CPD-0332
• DoP Nr. 1343-CPR-M 510-3

Approx. Rs 173 / Piece Get Latest Price

The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete.
The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete.

Advantages:

• The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
• The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
• The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The red plastic cap protects against soiling and thus ensures free-running of the thread.

Top Features:

• Simple assembly due to low setting energy.
• Low axial and edge distances due to uniform load introduction.
• Surface flush installation due to detachable screw connections.
• High flexibility due to using conventional screws and threaded rods.
• ETA approval for non-cracked concrete.

Applications:

• Steel constructions
• Handrails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Stand-off installations

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-04/0003
• DoP No. 0050
• DoP No. 0756-CPD-0289

Approx. Rs 310 / Piece Get Latest Price

The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete.
The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete.

Advantages:

• The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
• The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
• The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The red plastic cap protects against soiling and thus ensures free-running of the thread.

Top Features:

• Simple assembly due to low setting energy.
• Low axial and edge distances due to uniform load introduction.
• Surface flush installation due to detachable screw connections.
• High flexibility due to using conventional screws and threaded rods.
• ETA approval for non-cracked concrete.

Applications:

• Steel constructions
• Handrails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Stand-off installations

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-04/0003
• DoP No. 0050
• DoP No. 0756-CPD-0289

Approx. Rs 404 / Piece Get Latest Price

The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete.
The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete.

Advantages:

• The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
• The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
• The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The red plastic cap protects against soiling and thus ensures free-running of the thread.

Top Features:

• Simple assembly due to low setting energy.
• Low axial and edge distances due to uniform load introduction.
• Surface flush installation due to detachable screw connections.
• High flexibility due to using conventional screws and threaded rods.
• ETA approval for non-cracked concrete.

Applications:

• Steel constructions
• Handrails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Stand-off installations

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-04/0003
• DoP No. 0050
• DoP No. 0756-CPD-0289

Approx. Rs 883 / Piece Get Latest Price

The through bolt anchor with threaded bolts with sophisticated design in cracked concrete.The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited to fix railings, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With threaded bolts.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 3,260 / Piece Get Latest Price

The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete.Advantages

• The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.
• The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
• The FZUB special drill allows for a fast installation by creating the undercut without having to change tools.
• The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.
• Top Features
  • Maximum safety due to a positive fit connection.
  • Low axial and edge distances due to expansion pressure-free installation.
  • Fast installation, no exchanging tools. This saves time and costs.
  • Power-saving installation with low setting energy.
  • ETA approval for cracked concrete and fire resistance class R 120.

Approx. Rs 321 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas.Advantages

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
• Top Features
  • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
  • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
  • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
  • Simple assembly due to few taps and minimal slippage.
  • Stainless steel: permanent safety in outdoor use.

Approx. Rs 76 / Piece Get Latest Price

The screw fixing with countersunk head  for the stress-free installation of window and door frames.The fischer metal frame plug F 10 M is a special fixing for stress-free stand-off installation of window and door frames. This consists of a metal sleeve and a countersunk head screw made of zinc-plated steel. The F 10 M is set in the time-saving pre-positioned installation. When the screw is tightened, the cone is pulled into the fixing sleeve and expands itself against the hole wall. This means that the window frame is fixed in a stress-free manner in solid and hollow building materials. The fischer metal frame plug F 10 M is also suitable for squared timbers as well as fixing window and door frames.Advantages

• The F-M metal frame plug achieves fire resistance F 120. This allows for use in areas where fire resistance is relevant.
• The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame.
• The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame.
• The cover caps (available separately) can be used to discreetly cover the screw heads.
• Top Features
  • Fire protection tested in line with R 120: Usage in areas where fire resistance is relevant.
  • Stress-free, durable fixing of the frame. Continuous thread prevents the frame from being pulled.
  • Use for all solid and hollow building materials lowers complexity.
  • Compression and tensile-resistant anchoring of metal and plastic profiles.
  • With countersunk head screw.

Approx. Rs 61 / Piece Get Latest Price

The screw fixing with countersunk head  for the stress-free installation of window and door frames.The fischer metal frame plug F 10 M is a special fixing for stress-free stand-off installation of window and door frames. This consists of a metal sleeve and a countersunk head screw made of zinc-plated steel. The F 10 M is set in the time-saving pre-positioned installation. When the screw is tightened, the cone is pulled into the fixing sleeve and expands itself against the hole wall. This means that the window frame is fixed in a stress-free manner in solid and hollow building materials. The fischer metal frame plug F 10 M is also suitable for squared timbers as well as fixing window and door frames.Advantages

• The F-M metal frame plug achieves fire resistance F 120. This allows for use in areas where fire resistance is relevant.
• The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame.
• The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame.
• The cover caps (available separately) can be used to discreetly cover the screw heads.
• Top Features
  • Fire protection tested in line with R 120: Usage in areas where fire resistance is relevant.
  • Stress-free, durable fixing of the frame. Continuous thread prevents the frame from being pulled.
  • Use for all solid and hollow building materials lowers complexity.
  • Compression and tensile-resistant anchoring of metal and plastic profiles.
  • With countersunk head screw.

Approx. Rs 82 / Piece Get Latest Price

The installation-friendly Hammerset anchor for multiple fixings.The fischer nail anchor FNA II 6 with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone is then pulled into the expansion clip and expands it against the hole wall. Above all, the fischer nail anchor FNA II 6 with nail head is suitable for fixing fire protection boards, wire and nonious hangers in internal areas.Advantages

• The special active principle allows for a simple hammerset installation and, therefore, a short processing time.
• The extremely short anchor depth prevents reinforcement hits, and creates the conditions for a trouble-free installation.
• The optimised expansion clip ensures hold when placing in the drill hole, and prevents it falling out during overhead installations.
• The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
• A range of head shapes allows for the fixing of wide-ranging fixtures, and for the ideal adaptation to suit the intended use.
• Top Features
  • Hammerset installation saves time.
  • No reinforcement hits due to low anchorage depth This saves time and costs during series installation.
  • Expansion clip provides a firm hold.
  • ETA approval for multiple fixings.
  • Series installation possible with setting tool for the hammer drill. This saves time and costs.

Approx. Rs 1,701 / Piece Get Latest Price

The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete.Advantages

• The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.
• The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
• The FZUB special drill allows for a fast installation by creating the undercut without having to change tools.
• The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.
• Top Features
  • Maximum safety due to a positive fit connection.
  • Low axial and edge distances due to expansion pressure-free installation.
  • Fast installation, no exchanging tools. This saves time and costs.
  • Power-saving installation with low setting energy.
  • ETA approval for cracked concrete and fire resistance class R 120.

Approx. Rs 631 / Piece Get Latest Price

The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is driven above the cone with the setting tool FZE Plus and fills the undercut drill hole with a positive fit. The fischer ZYKON bolt anchor FZA is ideal for fixing steel constructions, railings, and machines within internal areas in cracked concrete.Advantages

• The special ZYKON undercut technology allows for a positive fit connection and ensures maximum safety, even in large cracks.
• The almost expansion-free installation of the anchor allows small edge distances and axial spacing, and thereby enables flexible use.
• The FZUB special drill allows for a fast installation by creating the undercut without having to change tools.
• The drill hole geometry allows for a very low setting energy, thus reducing the energy required for installation.
• Top Features
  • Maximum safety due to a positive fit connection.
  • Low axial and edge distances due to expansion pressure-free installation.
  • Fast installation, no exchanging tools. This saves time and costs.
  • Power-saving installation with low setting energy.
  • ETA approval for cracked concrete and fire resistance class R 120.

Approx. Rs 222 / Piece Get Latest Price

The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete.
The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete.Advantages

• The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
• The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
• The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The red plastic cap protects against soiling and thus ensures free-running of the thread.
• Top Features
  • Simple assembly due to low setting energy.
  • Low axial and edge distances due to uniform load introduction.
  • Surface flush installation due to detachable screw connections.
  • ETA approval for non-cracked concrete.

Approx. Rs 574 / Piece Get Latest Price

The through bolt anchor with sophisticated design in cracked concrete.The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The low profile of the screw head ensures for a discreet fixing.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 855 / Piece Get Latest Price

The through bolt anchor with countersunk head in cracked concrete.The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The countersunk finished screw head allows for flush-mounted fixing.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With countersunk head for assembly that is flush to the surface.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 97 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.Advantages

• The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The anchor is also ideal for large fixture thicknesses.
• The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
• Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
• The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.
• Top Features
  • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
  • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
  • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
  • Simple assembly due to few taps and minimal slippage.
  • The drive-in pin protects the thread from damage. This saves time during installation and removal.

Approx. Rs 322 / Piece Get Latest Price

The fischer bolt anchor FAZ II K A4 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to simple mounting, the FAZ II A4 can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. The steel anchor is, for example, suitable for fixing railings, consoles, steel constructions, and gates.Advantages

• The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth (new also for M8 version) allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
• Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
• The international approvals guarantee maximum safety and the best performane. These approvals even cover the use in earthquake zones (seismic performance) or the use of hollow drills.
• Top Features
  • Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
  • Simple assembly: few taps and minimal torque slippage. This saves time and power.
  • Stainless steel: maximum security for outdoor use.

Approx. Rs 60 / Piece Get Latest Price

The fischer metal frame plug F 10 M is a special fixing for stress-free stand-off installation of window and door frames. This consists of a metal sleeve and a countersunk head screw made of zinc-plated steel. The F 10 M is set in the time-saving pre-positioned installation. When the screw is tightened, the cone is pulled into the fixing sleeve and expands itself against the hole wall. This means that the window frame is fixed in a stress-free manner in solid and hollow building materials. The fischer metal frame plug F 10 M is also suitable for squared timbers as well as fixing window and door frames.Advantages

• The F-M metal frame plug achieves fire resistance F 120. This allows for use in areas where fire resistance is relevant.
• The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame.
• The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame.
• The cover caps (available separately) can be used to discreetly cover the screw heads.
• Top Features
  • Fire protection tested in line with R 120: Usage in areas where fire resistance is relevant.
  • Stress-free, durable fixing of the frame. Continuous thread prevents the frame from being pulled.
  • Use for all solid and hollow building materials lowers complexity.
  • Compression and tensile-resistant anchoring of metal and plastic profiles.
  • With countersunk head screw.

Approx. Rs 341 / Piece Get Latest Price

The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete.
The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete.

Advantages:

• The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation.
• The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible.
• The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use.
• The red plastic cap protects against soiling and thus ensures free-running of the thread.

Top Features:

• Simple assembly due to low setting energy.
• Low axial and edge distances due to uniform load introduction.
• Surface flush installation due to detachable screw connections.
• High flexibility due to using conventional screws and threaded rods.
• ETA approval for non-cracked concrete.

Applications:

• Steel constructions
• Handrails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Stand-off installations

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-04/0003
• DoP No. 0050
• DoP No. 0756-CPD-0289

Approx. Rs 2,335 / Piece Get Latest Price

The through bolt anchor with threaded bolts with sophisticated design in cracked concrete.The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited to fix railings, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With threaded bolts.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 121 / Piece Get Latest Price

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Approx. Rs 150 / Piece Get Latest Price

The cost-effective high-performance anchor for push-through installations in non-cracked concrete.

Advantages:

• Easy to insert into the drill hole thanks to undersize
• High shear loads
• Removable

Applications:

• Handles
• Consoles
• Ladders
• Cable trays
• Gates
• Façades
• Temporary or structural fixings

Building Materials:
Suitable for:

• Concrete ≥ C12/15
• You can find detailed information on building materials in the registration document.

Approx. Rs 771 / Piece Get Latest Price

The through bolt anchor with threaded bolts with sophisticated design in cracked concrete.The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited to fix railings, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With threaded bolts.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 44 / Piece Get Latest Price

The fischer metal frame plug F 10 M is a special fixing for stress-free stand-off installation of window and door frames. This consists of a metal sleeve and a countersunk head screw made of zinc-plated steel. The F 10 M is set in the time-saving pre-positioned installation. When the screw is tightened, the cone is pulled into the fixing sleeve and expands itself against the hole wall. This means that the window frame is fixed in a stress-free manner in solid and hollow building materials. The fischer metal frame plug F 10 M is also suitable for squared timbers as well as fixing window and door frames.Advantages

• The F-M metal frame plug achieves fire resistance F 120. This allows for use in areas where fire resistance is relevant.
• The operating principle prevents the window frame from being pulled against the substrate, and ensures a stress-free and long-lasting fixing of the frame.
• The special plug geometry anchors the metal and plastic profiles against compressive and tensile loads, and allows for a secure hold of the window frame.
• The cover caps (available separately) can be used to discreetly cover the screw heads.
• Top Features
  • Fire protection tested in line with R 120: Usage in areas where fire resistance is relevant.
  • Stress-free, durable fixing of the frame. Continuous thread prevents the frame from being pulled.
  • Use for all solid and hollow building materials lowers complexity.
  • Compression and tensile-resistant anchoring of metal and plastic profiles.
  • With countersunk head screw.

Approx. Rs 56 / Piece Get Latest Price

The through bolt anchor with nut and washer for structural fixings in non-cracked concrete.The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete.Advantages

• The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation.
• The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B).
• The detachable screw connection allows for surface flush removal.

Top Features

• Simple alignment due to optimised anchor geometry, even in narrow spaces.
• Surface flush removal due to detachable screw connection.
• With nut and washer.