Mechanical Anchor

Approx. 467 / Piece Get Latest Price

The fischer anchor bolt FAZ II A4 is the steel anchor for maximum loads. Heavy loads are fastened in cracked concrete with the steel anchor. Thanks to the two anchorage depths and the easy installation, the FAZ II A4 can be used particularly flexibly. The proven expansion clip transfers loads particularly securely into the concrete and allows the maximum load-bearing capacity. With the stainless steel construction, loads are fastened outside. The steel anchor is ideal, for example, for fastening railings, brackets, steel constructions and gates.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
• Simple assembly: few taps and minimal torque slippage. This saves time and power.
• Stainless steel: maximum security for outdoor use.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. 834 / Piece Get Latest Price

The fischer anchor bolt FAZ II A4 is the steel anchor for maximum loads. Heavy loads are fastened in cracked concrete with the steel anchor. Thanks to the two anchorage depths and the easy installation, the FAZ II A4 can be used particularly flexibly. The proven expansion clip transfers loads particularly securely into the concrete and allows the maximum load-bearing capacity. With the stainless steel construction, loads are fastened outside. The steel anchor is ideal, for example, for fastening railings, brackets, steel constructions and gates.Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
• Simple assembly: few taps and minimal torque slippage. This saves time and power.
• Stainless steel: maximum security for outdoor use.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. 166 / Piece Get Latest Price

The fischer bolt anchor FAZ II is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:

Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. 239 / Piece Get Latest Price

The fischer bolt anchor FAZ II is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. 397 / Piece Get Latest Price

The fischer bolt anchor FAZ II is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. 696 / Piece Get Latest Price

Advantages:

• Secure function and simple installation.
• Two Anchorage depths for more flexibility in the application.
• Use of hollow drills and diamond drills regulated in the European Technical Assessment ETA.
• Assortment: M 8 – M16, available in zinc-plated steel and stainless steel A4.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:

• Concrete C20/25 to C50/60, cracked and non-cracked
• Concrete C12/15

Permission:

• ETA-17/0624
• DoP No. 0122

Approx. 191 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas.Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• Stainless steel: permanent safety in outdoor use.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296

Approx. 293 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• Stainless steel: permanent safety in outdoor use.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296

Approx. 63 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Machines
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 71 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.
Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Machines
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 126 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.
Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• 
  
• Building Materials:

Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

* You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 117 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
•  You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 151 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.
Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 176 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 241 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 390 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 515 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The anchor is also ideal for large fixture thicknesses.
• The long thread balances component tolerances and stand-off installations, and thus increases flexibility.
• Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly.
• The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 643 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.
• Ideal for high loads.

Applications:

• Steel constructions
• Consoles
• Machines
• Staircases
• Gates

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure
•  You can find detailed information on building materials in the registration document.

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1

Approx. 577 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.
• Ideal for high loads.

Approx. 116 / Piece Get Latest Price

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Approx. 152 / Piece Get Latest Price

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Approx. 184 / Piece Get Latest Price

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Approx. 298 / Piece Get Latest Price

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked
•  You can find detailed information on building materials in the registration document.

Permission:

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Approx. 36 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. 34 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. 44 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. 56 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. 65 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
• You can find detailed information on building materials in the registration document.

Approx. 1,207 / Piece Get Latest Price

The through bolt anchor with threaded bolts with sophisticated design in cracked concrete.The fischer high-performance anchor FH II B with threaded bolt is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II B with threaded bolt is ideally suited to fix railings, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The practical fixing using washers and nuts allows for the ultimate removal of the attachment if required later.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With threaded bolts.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. 160 / Piece Get Latest Price

Advantages

• Secure function and simple installation.
• Two Anchorage depths for more flexibility in the application.
• Use of hollow drills and diamond drills regulated in the European Technical Assessment ETA.
• Assortment: M 8 – M16, available in zinc-plated steel and stainless steel A4.

Approx. 270 / Piece Get Latest Price

Advantages

• Secure function and simple installation.
• Two Anchorage depths for more flexibility in the application.
• Use of hollow drills and diamond drills regulated in the European Technical Assessment ETA.
• Assortment: M 8 – M16, available in zinc-plated steel and stainless steel A4.

Approx. 332 / Piece Get Latest Price

Advantages

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Approx. 53 / Piece Get Latest Price

Advantages:

• Easy to insert into the drill hole thanks to undersize
• High shear loads
• Removable

Applications:

• Handles
• Consoles
• Ladders
• Cable trays
• Gates
• Façades
• Temporary or structural fixings

Building Materials:Suitable for:

• Concrete ≥ C12/15
• You can find detailed information on building materials in the registration document.

Approx. 111 / Piece Get Latest Price

Advantages

• Secure function and simple installation.
• Two Anchorage depths for more flexibility in the application.
• Use of hollow drills and diamond drills regulated in the European Technical Assessment ETA.
• Assortment: M 8 – M16, available in zinc-plated steel and stailess steel

Approx. 97 / Piece Get Latest Price

The fischer bolt anchor FAZ II K is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.Advantages

• The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth (new also for M8 version) allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
• Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
• The international approvals guarantee maximum safety and the best performane. These approvals even cover the use in earthquake zones (seismic performance) or the use of hollow drills.
• Top Features
  • With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
  • Minimum torque slippage: Simple assembly saves time as well as wear and tear.
  • With approval for cracked concrete and fire inspection: maximum safety.

Approx. 49 / Piece Get Latest Price

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.

Advantages:

• The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• Available with metric and imperial threads

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:

• Concrete C20/25, non-cracked
•  You can find detailed information on building materials in the registration document.

Approx. 446 / Piece Get Latest Price

The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TORX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.Advantages

• With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
• The special saw tooth geometry enables fast cutting into the concrete.
• Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
• Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
• The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
• The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
• The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
• Top Features
  • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
  • The special saw tooth geometry enables fast cutting into the concrete.
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.

Approx. 304 / Piece Get Latest Price

The fischer ULTRACUT FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TORX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example.Advantages

• With up to 3 embedment depths, the ULTRACUT FBS II US allows for the same screw to be used for different component thicknesses.
• The special saw tooth geometry enables fast cutting into the concrete.
• Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper.
• Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings.
• The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2.
• The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again.
• The checking gauge allows for reuse in temporary fixings (e.g. inclined supports) covered by the national approval.
• Top Features
  • With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses.
  • The special saw tooth geometry enables fast cutting into the concrete.
  • The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again.