Bolt Anchor

Approx. Rs 485 / Piece Get Latest Price

The fischer anchor bolt FAZ II A4 is the steel anchor for maximum loads. Heavy loads are fastened in cracked concrete with the steel anchor. Thanks to the two anchorage depths and the easy installation, the FAZ II A4 can be used particularly flexibly. The proven expansion clip transfers loads particularly securely into the concrete and allows the maximum load-bearing capacity. With the stainless steel construction, loads are fastened outside. The steel anchor is ideal, for example, for fastening railings, brackets, steel constructions and gates.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
• Simple assembly: few taps and minimal torque slippage. This saves time and power.
• Stainless steel: maximum security for outdoor use.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. Rs 75 / Piece Get Latest Price

Cost efficient fixing with ETA approval for non- cracked concrete.

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Applications

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, non-cracked
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-13/0772
• DoP No. 0034
• DoP No. 0756-CPD-0606

Approx. Rs 172 / Piece Get Latest Price

Advantages

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Approx. Rs 53 / Piece Get Latest Price

Advantages

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Approx. Rs 762 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The stainless steel version of the bolt anchor is suitable for fixing façade sub-structures, consoles, and ladders in external areas.Advantages

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.
• Top Features
  • The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
  • If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
  • Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
  • Simple assembly due to few taps and minimal slippage.
  • Stainless steel: permanent safety in outdoor use.

Approx. Rs 2,051 / Piece Get Latest Price

The through bolt anchor with sophisticated design in cracked concrete.The fischer high-performance anchor FH II S with hexagonal head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II S with hexagonal head is ideally suited to fix consoles, steel constructions, and cable trays in cracked and non-cracked concrete.Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The low profile of the screw head ensures for a discreet fixing.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 1,010 / Piece Get Latest Price

The through bolt anchor with countersunk head in cracked concrete.The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete.
Advantages

• The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2).
• The countersunk finished screw head allows for flush-mounted fixing.
• The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required.
• The optimised geometry intelligently reduces the energy required for assembly.
• The approval regulates the use of hollow drills.
• Top Features
  • With countersunk head for assembly that is flush to the surface.
  • The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2).
  • The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points.
  • The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly.

Approx. Rs 107 / Piece Get Latest Price

Advantages

• Secure function and simple installation.
• Two Anchorage depths for more flexibility in the application.
• Use of hollow drills and diamond drills regulated in the European Technical Assessment ETA.
• Assortment: M 8 – M16, available in zinc-plated steel and stainless steel A4.

Approx. Rs 330 / Piece Get Latest Price

The fischer bolt anchor FAZ II K A4 is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to simple mounting, the FAZ II A4 can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The stainless steel version is used to fix loads in outdoor areas. The steel anchor is, for example, suitable for fixing railings, consoles, steel constructions, and gates.Advantages

• The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth (new also for M8 version) allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
• Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
• The international approvals guarantee maximum safety and the best performane. These approvals even cover the use in earthquake zones (seismic performance) or the use of hollow drills.
• Top Features
  • Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
  • Simple assembly: few taps and minimal torque slippage. This saves time and power.
  • Stainless steel: maximum security for outdoor use.

Approx. Rs 1,162 / Piece Get Latest Price

The fischer anchor bolt FAZ II A4 is the steel anchor for maximum loads. Heavy loads are fastened in cracked concrete with the steel anchor. Thanks to the two anchorage depths and the easy installation, the FAZ II A4 can be used particularly flexibly. The proven expansion clip transfers loads particularly securely into the concrete and allows the maximum load-bearing capacity. With the stainless steel construction, loads are fastened outside. The steel anchor is ideal, for example, for fastening railings, brackets, steel constructions and gates.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance.

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• Powerful connection: Expansion clip ensures optimum load-carrying properties. Fewer fixing points and smaller anchor plates save time and costs.
• Simple assembly: few taps and minimal torque slippage. This saves time and power.
• Stainless steel: maximum security for outdoor use.

Approx. Rs 105 / Piece Get Latest Price

The anchor bolt to meet the highest requirements in concrete. Powerful and flexible.The fischer bolt anchor FAZ II K is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.

Advantages:

• The FAZ ll tried and tested expansion clip enables the highest load bearing capacity. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth (new also for M8 version) allows for significantly reduced drill hole depths and reduces the number of reinforcement hits. This allows for a noticeably quicker installation.
• Fewer hammer blows when hammering in the anchor, together with the low torque slippage, ensure a noticeably simple and comfortable setting process.
• The international approvals guarantee maximum safety and the best performane. These approvals even cover the use in earthquake zones (seismic performance) or the use of hollow drills.

Top Features:

• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. Rs 295 / Piece Get Latest Price

The fischer bolt anchor FAZ II is the steel anchor for the most demanding requirements. Heavy loads are fixed into cracked concrete with the steel anchor. Due to the two anchorage depths and simple mounting, the FAZ II can be used in a particularly flexible manner. The proven expansion clip feeds the loads into the concrete in an especially secure manner and ensures maximum load-bearing properties. The zinc-plated steel version is used to fix loads in indoor areas. The steel anchor is, for example, suitable for fixing railings, cable trays and consoles.

Advantages:

• According to the new evaluation (ETA), the tensile strengths are decisive. Thus fewer anchors are required.
• The variable anchorage depths with sizes M8 to M16 allow a millimetre-accurate adjustment to the loads for the first time. 
• The version with the cap nut offers an optically attractive anchoring and protects against injuries as well thanks to the round shape.
• The first bolt anchor M6 with an ETA assessment Option 1 for secure and reliable anchorings.
• The international approvals guarantee maximum safety and the best performance

Top Features:

• One anchor - two anchorage depths: Reduced anchorage depths save time and costs during drilling.
• With expansion clip for maximum load-bearing capacity. Thus fewer fixing points and smaller anchor plates are required. This saves time and costs.
• Minimum torque slippage: Simple assembly saves time as well as wear and tear.
• With approval for cracked concrete and fire inspection: maximum safety.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades
• Timber constructions

Building Materials:
Approved for:

• Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

• Concrete C12/15
• Concrete C80/95 (classification available)
• You can find detailed information on building materials in the registration document.

Permission:

• ETA-05/0069
• DoP No. 0009
• DoP No. 0081
• DoP No. 0121
• DoP No. 0756-CPD-0062
• ESR-2948

Approx. Rs 181 / Piece Get Latest Price

Advantages:

• The standard anchorage depth achieves the maximum loadbearing capacities so fewer fixing points and smaller anchor plates are required.
• With only a few hammer blows and minimal torque slippage installation is a simple process.
• The drive-in pin protects the thread from damage, and ensures a faster installation and dismantling of the attachment.

Approx. Rs 83 / Piece Get Latest Price

The fischer bolt anchor FBN II is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The zinc-plated steel version of the bolt anchor is suitable for fixing railings, cable trays, and consoles in internal areas.

Advantages:

• The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required.
• The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
• The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility.
• Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation.
• The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment.

Top Features:

• The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates.
• If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation.
• Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility.
• Simple assembly due to few taps and minimal slippage.
• The drive-in pin protects the thread from damage. This saves time during installation and removal.

Applications:

• Steel constructions
• Guard rails
• Consoles
• Ladders
• Cable trays
• Machines
• Staircases
• Gates
• Façades

Building Materials:Approved for:

• Concrete C20/25 to C50/60, non-cracked

Also suitable for:

• Concrete C12/15
• Natural stone with dense structure

Permission:

• ETA-07/0211
• DoP No. 0015
• DoP No. 0756-CPD-0296
• GS 3.2/18-082-1-r1